Please recommend USB 3.0 eSATA Dual 3.5-Inch SATA III Hard Drive RAID Enclosure
Hardware Clinic - www.hardwarezone.com.sg
As per topic.
Looking for 2 Bay 3.5 HDD Enclosure for RAID 1 with eSATA.
Found these two on Amazon
Thunderbolt 3 4-bay Enclosure only?
Hey, I've been waiting for a thunderbolt 3 4-bay enclosure to use with my macbook 15" for a long time now. I wonder if anyone know of anyone supplying these? Needs to be for 3,5" drives.Found some very expensive options like this,
Looking for a drive enclosure...
Is there a drive enclosure out there that has USB 2.0 and eSata III (6 gb/sec). Also needs to be 2.5 inch drive as that is more portable/smaller.I've been sort of looking (mostly eBay) but haven't had luck. Most of the ones I find are USB 2.0 with eSATA II (3 gb/s). Now, USB 3.0 and eSATA II...
External Mirrored Array Setup (RAID 1) - eSATA or USB 3.0?
I am going with a Mini ITX setup, so my mirrored array that was once internal (previously 2 x 1TB, new will be 2 x 2TB, 3TB, or 4TB) will now need to be external. So, what's a good setup? I'm thinking an external enclosure to house the two drives, externally powered. My new MB has USB 3.0 ...
eSATA Storage Enclosure plugged right into motherboard?
Do you know if it is possible to bypass the whole eSATA multiplier raid cards and plug the eSATA cable directly into the motherboard? If not, do I need a specific motherboard that supports this, or must I deal with these crappy port multiplier cards? Thanks
Got new HDD's and RAID enclosure. Do I need to stress test the HDD's?
I have hear that is smart to run some type of test software on new HDD's to force a drive to fail now and not in a few weeks after the warranty expires. I will be putting them in RAID 1 in my RAID enclosure. Should I test them in this setup or plug them in internally and test one at a time? ...
Looking for a good reliable 4 Bay RAID 1 enclosure
Hello all I'm looking for a reliable 4 Bay RAID 1 enclosure. I am not looking for a NAS enclosure, just a USB 3.0 or eSATA III one. This will not be attached to the network or a HTPC, just used for data backup, and then powered off. But I do need data redundancy since I have a large a...
Advice on an external RAID enclorure....
Hi all, I'd like to set up an external RAID array for video editing. I have done some searching, but remain a little confused. I currently have 4 ea. Seagate Barracuda 7200.14 ST3000DM001 3TB 7200 RPM SATA III 6Gb/s drives w/64MB cache to install in the array. My workstaion: a...
Enabling eSATA for P8Z77-v Pro
I have a new RAID enclosure that is currently hooked up to my P8Z77-V pro using USB 3.0. However even after uypdating the USB 3.0 drivers, the RAID enclosure often suddenly disconnects and reconnects. I want to switch to eSATA. However when I connect via eSATA the drive starts up and then sudd...
Read responses in forums.hardwarezone.com.sg