CF-19 mk6 lid needed
Kodak Printer Forum
Looking for the top silver lid, just the lid not the whole screen housing for my
Preferably used as funds are tight
Running Mk6 just with charger
Im using my CF-19 Mk6 more for doing a bit of work in the eves, just a question, is it OK to run it without battery,just on mains supply just worried about damaging internals if no battery is there Thanks
CF-19 Mk4 vs Mk6
Ive been using a low milage vgc Mk4 for the last 2 years with 1tb ssd, ive got the chance to get a cheapish Mk6, big question, is it worth it, would i be gaining a lot?. Thanks
CF-19 Mk6&MK7 Touchscreen issue
Hello Everyone,I am new here, so please take it easy . I am having a huge issue at my current work place that is affecting our MK6 and Mk7 Panasonic CF-19 touchscreens. We are running Windows 7 64 bit with a custom image. What we are seeing is the touchscreens are getting disabled som...
Questions about CF-19 MK6
Hi,I recently purchased a CF-19 MK6 and have a few questions about it's upgradability, as well as specific parts compatibility.I'm located in the US, and the model I ordered is a US market model, so all the localization questions should be answered with that in mind.I've read that the...
cf 19 mk6 touchscreen works...
Shut down the unit and restart, everything works fine. Work 5 to 30 min and it stops working all together until it is shut down and restarted again. I tried downloading the driver direct from Panasonic and installing but no difference. Unit was set up with recovery disc from Panasonic original...
CF-19 Mk6 BIOS chip location?
Hello,Apologies if this has been covered before, I have searched but with no luck.Can anyone tell me whether the BIOS in a Mk6 CF-19 is stored in a conventional EEPROM chip, and if so, whereabouts on the system board I would find the chip? Also, if there is such a chip is it located where...
CF19 mk6 parts or info needed
I am looking for parts numbers or the actual part for a heatsink for a CF19 mk6.Full model number is CF-191MYAX1MAny info? I am planning on swapping a mk6 motherboard into my mk4.
Read responses in forum.printercomparison.com