How hard would it be to design a 3D printed bottom shell with flat sides for the G Pro?
Discuss please, i was just wondering and i don't know anything about 3D printing to be honest. '); }
G502 PMW3366 into 3D printed IMO1.1 shaped-shell
I'm attempting to design a shell that houses the PMW3366 of a G502 (based on the "Click Latencies compiled" thread @ 0.9ms on fw88.2.16). I have modeled the base of the mouse using the IMO1.1 as the blueprint, and will extrude the sides like the WMO to be | | as oppose to / \I've only spent ab...
Is it possible to 3D print a lighter topshell for G Pro/G102?
I find myself keeping on going back to my trusty G100s for its light weight. Even given the same overall weight, unmodded G100s feels much better due to its lower polar moment of inertia. It seems that the majority of the weight for the G Pro comes from the extraordinarily thick back shell, which...
COMPLETE: G403 internals in FK2 shell
Been working on this for a couple of months with someone else.-3D printed supports for sensor PCB-PCB floor lowered (milled out) for correct LOD-PCBs modified to fit shell-Mechanical encoder-Left side buttons work (removed right side buttons)-Ceesa paracord-D2f-01f switches for m1...
Mouse Wheel 'Shaft' Repair Question
Hello everyone, based on the results of this thread ( Previous Thread ), I've decided to make a more technical post about a problem I'm having with a broken mouse wheel shaft, what I've tried to repair it, and a new ideas about how to fix it. Hopefully a few of you have tried something like this...
A short visit to UE Irvine Office
for all the UE fan boys out there (maybe only machi di di). entrance of the UE building 3D printing machine. time efficient method as it is able to print a number of shells at one go. (secret behind UE fast turn around time) 3D printed shells. can see they are trying to ex...
3D printed shell for G303
I am currently in process of making my own 3d printed shell for Logitech G303. So far I've designed and sent to the printing the test model to check if i got the contact points between shell and pcb right. Also i need to check if my scroll wheel assembly actually works. Here are the pics of what ...
Node - 3D Printed PC Case
Table Of Contents: Spoiler: 1. Introduction/Concept Images Introduction and Concept Hi Everyone, Im back with another project, the last version of this one fell flat on its face due to a number of reasons, but this is pretty much version 2.0 of this concept...
Read responses in overclock.net