cpu temps throuh the roof on watercooled rig
I just reassembled my system after a deep clean of my loop and all the components, upgrading to skylake i5 6600K and MSI z170 in the process.
I have the EK Supremacy EVO cpu block, and before i reassembled i could not even surpass 60c under load
Now it idles around this temp, and as soon as i do anything, including just installing something, it shoots up to close to a 100c.
I am assuming this would indicate that something is very off here.
I have quite a large res, feeding my swiftech mcp655 pump, which goes straight to the cpu ---> radiator--->double GPU----> another radiator and then into the reservour again.
My gpus are idling at 26c so obviously the WC is doing its job on those.
I have no idea what could be wrong, i cleaned the block and attached it firmly to the cpu.
Could this be a bad chip or what could be wrong? I just don't get it.
Any help would be appreciated as I can do absolutely nothing now.
Edited by latprod - Today at 1:11 am '); }
Read responses in overclock.net